AS9075 Audio-System ALU-BYTUL 500 dempematter

AUDIO SYSTEM Alu Butyl 1.8 is an aluminum butyl acoustics insulating mat which improves the room acoustics in the car. The “weak” coating is easily set in motion and so the acoustic absorption increases and the acoustic reflection decreases. This acoustic absorption is an essential basic requirement for an effective improvement of the room acoustics.

AUDIO SYSTEM Alu Butyl 1.8 is an aluminum butyl acoustics insulating mat which improves the room acoustics in the car. The “weak” coating is easily set in motion and so the acoustic absorption increases and the acoustic reflection decreases. This acoustic absorption is an essential basic requirement for an effective improvement of the room acoustics.

The thinner aluminum foil effects a higher absorption of the sound energy. The slight covering is being set easily in motion and so the energy of the hydrodynamic interface is better transformed into heat. This physical mechanism happens directly in the layer between covering and butyl.

Advantages:
- Low weight with a high absorbability in order to improve room acoustics
- Stabilizing aluminum foil
- Easy handling (no heat gun necessary)
- Adapts smoothly to every outline
- Can be pasted over for several times (also overhead)
- Handling temperature from 5 degrees on
- Width: 500 mm (5sqm)
- Thickness: 1,75mm butyl + 0,05mm aluminum coating
- Weight: 2,75 kg / m²

Application range:
Acoustical-absorption-damping to improve room acoustics (because of a higher degree of absorption in direct nearness to an acoustic source.

Handling:
Happens by gluing on the respective adequate and cleaned subsurface. Air inclusion should be avoided.

Varenummer: AS9075
Lagerstatus: bestillingsvare, leveringtid 3 til 7 dager

kr 1 998,00 Delbetal med Klarna konto fra kr 95,00 per måned.

inkl. merverdiavgift, frakt beregnes ved betaling