Output Power Nominal: 20 Hz ? 20 kHz, THD < 1.0%, 4 Ohm 2 x 110 W 20 Hz ? 20 kHz, THD < 1.0%, 8 Ohm 2 x 75 W Peak: 1 kHz, 4 Ohm 2 x 200 W Frequency response CD/Tuner/Aux/Line/Tape 5 Hz ? 100 kHz (-3,0 dB) 20 Hz ? 20 kHz (+/-0,1 dB) Phono 20 Hz ? 20 kHz (+/-0,3 dB) Subsonic Filter: 16Hz, 18dB/Oct. S/N ratio CD/Tuner/Aux/Line/Tape 110dB Phono MM 88dB Phono MC 75dB Input sensitivity CD/Tuner/Aux/Line/Tape 400mV/100 kOhm Phono MM 2mV/47 kOhm Phono MC 0,3mV/470 Ohm Mains voltage 230 VAC / 50 Hz Power consumption Maximal 250 W Standby 1,0 W Colour versions Silver, Black Dimensions W x H x D Main unit: 430mm x 125mm x 330mm (380mm incl. controls and connectors) Remote control: 45mm x 190mm x 23mm Weight 11,0 kg Scope of delivery MA 800 main unit, remote control incl. batteries, Power cord, instruction manual Dual mono construction valve pre-amplifier equipped with two ECC82 double triodes Carefully selected and ?burnt-in? (60 hours) valves from Russia MM/MC phono pre-amplifier with low-noise operational amplifiers Two record players / pick-ups may be connected simultaneously to separate input sockets for MM and MC Four high-level inputs Additional front panel mounted 3.5 mm audio input for portable devices Input selection by precision relay Volume and balance controlled by high precision ALPS potentiometers Power amplifier with high-quality power transistors by Sanken and fully discrete circuitry Sophisticated Dual Mono power supplies and generously dimensioned toroidal transformer Separate standby mode for minimal energy consumption when not in use Dot matrix display that can be switched off Generously dimensioned and insulated loudspeaker connector terminals Output terminals provide for bi-wired operation Headphone output Substantial chassis with machined eight millimetre thick aluminium front panel Elegant full-metal system remote for controlling
Output Power
Nominal: 20 Hz ? 20 kHz, THD < 1.0%, 4 Ohm 2 x 110 W 20 Hz ? 20 kHz, THD < 1.0%, 8 Ohm 2 x 75 W
Peak: 1 kHz, 4 Ohm 2 x 200 W
Frequency response
CD/Tuner/Aux/Line/Tape 5 Hz ? 100 kHz (-3,0 dB) 20 Hz ? 20 kHz (+/-0,1 dB)
Phono 20 Hz ? 20 kHz (+/-0,3 dB)
Subsonic Filter: 16Hz, 18dB/Oct.
S/N ratio
CD/Tuner/Aux/Line/Tape 110dB
Phono MM 88dB
Phono MC 75dB
Input sensitivity
CD/Tuner/Aux/Line/Tape 400mV/100 kOhm
Phono MM 2mV/47 kOhm
Phono MC 0,3mV/470 Ohm
Mains voltage 230 VAC / 50 Hz
Power consumption Maximal 250 W
Standby 1,0 W
Colour versions Silver, Black
Dimensions W x H x D Main unit: 430mm x 125mm x 330mm
(380mm incl. controls and connectors)
Remote control: 45mm x 190mm x 23mm
Weight 11,0 kg
Scope of delivery MA 800 main unit, remote control incl. batteries, Power cord, instruction manual
Dual mono construction valve pre-amplifier equipped with two ECC82 double triodes
Carefully selected and ?burnt-in? (60 hours) valves from Russia
MM/MC phono pre-amplifier with low-noise operational amplifiers
Two record players / pick-ups may be connected simultaneously to separate input sockets for MM and MC
Four high-level inputs
Additional front panel mounted 3.5 mm audio input for portable devices
Input selection by precision relay
Volume and balance controlled by high precision ALPS potentiometers
Power amplifier with high-quality power transistors by Sanken and fully discrete circuitry
Sophisticated Dual Mono power supplies and generously dimensioned toroidal transformer
Separate standby mode for minimal energy consumption when not in use
Dot matrix display that can be switched off
Generously dimensioned and insulated loudspeaker connector terminals
Output terminals provide for bi-wired operation
Headphone output
Substantial chassis with machined eight millimetre thick aluminium front panel
Elegant full-metal system remote for controlling
kr 13 995,00
Delbetal med Klarna konto fra kr 95,00 per måned.
inkl. merverdiavgift, frakt beregnes ved betaling
EikerAudio - Tomtegata 31 - 3012 Drammen
T: 40 57 57 60 E: post@eikeraudio.no
Klarna EikerAudio © 2011-12 - Innholdsoversikt | Webdesign og e-handel fra Siteman AS